Atlas Rotary Air Powered Front Mount B42 Collet Chucks

Atlas Air Powered Front Mount B80 Dead Length Collet Chucks

No Draw-Tube or Air Feed Tubes Required: for Lathes, Rotary Tables, and Grinders:

Series ATL207-B80

*No Hydraulic System Required
*No Draw Tube or Air Feed Tubes Restricting Spindle Bore
*No Rear Cylinders and Cylinder Adapters
*Low Cost
*Easily Convert any Lathe or Grinder into a Production Machine
*Ideal for Rotary Table Applications
*Change from Collet Chuck to Standard Chuck Quick and Easy
*High Speed 2000 RPM
*High Accuracy Less Than .001” TIR
*Repeats on Duplicate Parts Plus Minus .00015”
*Dead Length Design
*For Best Accuracy Use High Quality Crawford Collets
*Lever or Foot Pedal Actuated
*Low Maintenance with Oil Mist Lubrication System
*High Resistance to Coolant and Chip Penetration
*Uses B80 Collets, Range 1/16" to 3.150"
*Available in A, D, L, 4 Degree, Threaded and Straight Recess Mounting

	Collet Chuck	ATL210-B80	Specifications	ATL210-B80
Collet Chuck Order No. with Mount: ATL210-B80 Straight Recess Mount Type A Mount ATL210-B80A5 ATL210-B80A6 ATL210-B80A8 Type D Mount ATL210-B80D5 ATL210-B80D6 ATL210-B80D8 Collet Chuck Supplied with: • 2 Filter Bars • 2 Air Hoses • 1 Fixing Bracket for Hoses • 1 Hex Key • Mounting Bolts • Users Manual	A	246mm (9.67")	Screw Hole Dia	11mm (0.43") x 6
	B	200mm (7.87")	Collet Type	B80 Collets
	C	80mm (3.15")	Max. RPM	2000
	D	5mm (0.20")	Sleeve Stroke	4mm (0.16")
	E	152mm (5.98")	Air Pressure	3-8 kg/cm2 (42-114 psi)
	F	80mm (3.15")	Through Hole Dia	80mm (3.15")
	G	196mm (7.72")	Grip Force	19,932 lbs @ 100 PSI
	H	226mm (8.90")	Chuck Weight	32.kg (71.1lbs)
NOTE: “E” shown is for model ATL210-B80 Collet Chuck with no mounting plate. Add 3/4" to the “E” dimension for mounting plate. This will vary slightly depending on the mounting required. If an exact “E” dimension is required, consult factory. OPTIONS: Order No: LEV100 Lever Control Package: (Includes: Lever Control, Line Filter, Lubricator and regulator.)