The majority of the Dyna-Force clamp is below the surface of the fixture which provides excellent clamp support
and makes for a very low profile. The clamp jaw, which is relief cut for maximum contact with the workpiece, slides
on an angle for positive downforce.
The clamp jaw is available with smooth or serrated faces.
The support surface of the Dyna-Force clamp can be installed flush with the fixure plate or raised to hold the
workpiece off the fixture, enabling drill-through. This support surface is wire cut so the pressure of the jaw
keeps the bottom of the workpiece precisely to the fixture.
-Incredible Clamping and Hold Down Power
-Low Profile, Compact Design
-High Quality Stainless Steel Construction
-Easy to Install
-Smooth or Serrated
-Five Different Sizes
Part Number
A*
B
C
D
E
F
Min
G Optimum
Max
Clamp Travel
Drive Screw
Key Size
Clamp Jaw+ & Hardiness
28314
20.00
24.90
19.00
19.90
4.50
13.50
3.25
5.00
6.75
2.0
6mm
5mm
Smooth 34RC
28318
20.00
24.90
19.00
19.90
4.50
13.50
3.25
5.00
6.75
2.0
6mm
5mm
Serrated 44RC
28320
25.00
29.90
24.00
24.90
5.00
15.00
4.50
6.50
8.35
2.2
8mm
6mm
Smooth 34RC
28322
25.00
29.90
24.00
24.90
5.00
15.00
4.50
6.50
8.35
2.2
8mm
6mm
Serrated 44RC
28324
30.00
37.90
29.00
29.90
7.00
20.00
4.50
7.50
10.75
3.8
10mm
8mm
Smooth 34RC
28328
30.00
37.90
29.00
29.90
7.00
20.00
4.50
7.50
10.75
3.8
10mm
8mm
Serrated 44RC
28334
40.00
47.90
39.00
39.90
8.00
25.00
6.00
9.50
13.00
4.3
12mm
10mm
Smooth 34RC
28338
40.00
47.90
39.00
39.90
8.00
25.00
6.00
9.50
13.00
4.3
12mm
10mm
Serrated 44RC
28344
50.00
60.90
49.00
49.90
10.00
30.00
7.00
11.00
15.50
5.0
16mm
14mm
Smooth 34RC
28348
50.00
60.90
49.00
49.90
10.00
30.00
7.00
11.00
15.50
5.0
16mm
14mm
Serrated 44RC
* Body diameter + Smooth jaw only will have relief cut
DYNA-FORCE CLAMP INSTALLATION
Determine the location of your part on the fixture.
Decide on the mounting method you want to use for attaching
the Dyna-Force Clamp to your fixture. This decision determines the
hole centers you will need.
The mounting methods are:
"H" - side mount style (use BHCS)
"I" - side mount style (use BHCS)
"J" - side mount style (use BHCS)
Decide on the mounting method you want to use for attaching
the Dyna-Force Clamp to your fixture. This decision determines the
hole centers you will need.
