Mitee-Bite Series-9 Clamps

Series-9 Clamps

This adjustable low profile, cam action clamp provides clamping of different size workpieces merely by rotating the clamp to one of its other edges. The clamps are .394 (10mm) high and use a 1/2-13 (M12) cam screw. Each of the six clamping surfaces is a different distance from the centerline by .0394 (1mm) as shown in the chart. Therefore, one Series-9 Clamp can hold parts that vary up to .240 (9.4mm) simply by rotating the clamp to a different clamping surface.

Serrated or smooth edges
Heat treated and plated
4,000 lbs. (17800 N.m.) holding force

Inch

Part Number	Description	Face Number	Distance From CL
90110	1-6 Smooth	1	.4724
90115	1-6 Serrated	2	.5118
		3	.5512
		4	.5906
		5	.6299
		6	.6693

90120	7-12 Smooth	7	.7086
90125	7-12 Serrated	8	.7480
		9	.7874
		10	.8268
		11	.8661
		12	.9055

Part Number	Description	Face Number	Distance From CL
90130	13-18 Smooth	13	.9449
90135	13-18 Serrated	14	.9842
		15	1.0236
		16	1.0630
		17	1.1024
		18	1.1417

90140	19-24 Smooth	19	1.1811
90145	19-24 Serrated	20	1.2205
		21	1.2598
		22	1.2992
		23	1.3386
		24	1.3780

Metric

Part Number	Description	Face Number	Distance From CL
95110	1-6 Smooth	1	12mm
95115	1-6 Serrated	2	13mm
		3	14mm
		4	15mm
		5	16mm
		6	17mm

95120	7-12 Smooth	7	18mm
95125	7-12 Serrated	8	19mm
		9	20mm
		10	21mm
		11	22mm
		12	23mm

Part Number	Description	Face Number	Distance From CL
95130	13-18 Smooth	13	24mm
95135	13-18 Serrated	14	25mm
		15	26mm
		16	27mm
		17	28mm
		18	29mm

95140	19-24 Smooth	19	30mm
95145	19-24 Serrated	20	31mm
		21	32mm
		22	33mm
		23	34mm
		24	35mm